KKMC Ver 2.58

- World First! Huawei Mi-Fi modems E5830, E5832, E5836, E5838, E5857 new protection unlock solution added
- Fixed error “SC_R” diplayed for KKBox/Dongle users while new KK version available(Check Account option)
- Fixed decreasing premium credits bug in MTK phones(KKBox/Dongle users)
- Samsung S8000/S8003/M8910 MSL2 enabled for credit users

Samsung S8000/S8003/M8910 unlocking manual by usb cable :

>> Read Unlock Codes by USB Cable <<

1. Be sure that battery is at least half charged!!!
1. Power ON phone without simcard
2. Connect USB cable, install drivers from support: Samsung_USBDrivers.exe
3. Select “Read Unlock Codes” option and click EXECUTE
4. Do not try disconnect phone or other stupid things!!!
5. Wait few seconds for codes
TIP: for read unlock codes phone can be in Samsung or Qualcomm mode

>> Read PhoneLock or SimcardLock by USB Cable <<

If phone ask for PhoneLock code after power on use [method 1]
If phone ask for SimCard code after power on with simcard inside use method 2

[Method 1]
1. Power ON phone without simcard
2. Connect cable, install drivers from support: Samsung_USBDrivers.exe (or from CD with phone)
3. Select “Read PhoneLock” option and click EXECUTE and wait for codes
4. If phone have SimCard lock set(check with simcard) do now Method 2

[Method 2]
1. Power ON phone without simcard
2. Enter code: *#782872# it will switch mode to Qualcomm
3. Connect cable, install drivers from support: QUALCOMM_USB_Driver.rar
4. Go to SETTINGS and click DETECT,select COM port with “Qualcomm Diagnostic” name and click ACCEPT
5. Select “Read PhoneLock” or “Read Simcard Lock”(or both) option(s) and click EXECUTE and wait for codes
6. Switch back communication to Samsung mode by enter *#726872# code

TIP: PhoneLock code can be readed in both Samsung & Qualcomm mode
SimCard Lock code can be readed ONLY in Qualcomm mode