29/03/10ï¼HWK Release
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
This release contains a new update client which you ONLY need to run if you have the message "None Authorised Copy of Software detected, Please Use Original Install Package:0" That means users without the message do not need to run this new update client, but if you do no harm will be done, you just lose 1 log.
UFS_SAMs v2.0.10.2
--------------------
SWIFT-AEROFONE
T239 added (CUNL,FL)
BROADCOM
Fixed UnFreeze Key Display.
25/03/10ï¼New HWK release!
UFS_DCTxBB5 v2.0.10.0
———————–
* New BB5 products: RM-381,RM-455,RM-468,RM-492,RM-529,RM-530,RM-570,RM-573,RM578,RM-579,RM-584,RM-599,RM-600,RM-635(6750-1,6350-1b,5730s-2,6790s-1b,E72-2,E72-1,3208c,6760s-1,2730c-1,2730c-1b,E72-5,6790s-1c,E63-5,2690)
* New DCT4+ products: RM-590,RM-591 (2220s-2,2220s-2b)
* More DCT4+ added for unlock (ASIC 3168) see corresponding list.
* McuSw tag fixed in vpl parser.
* Fixed time-out bug for some RAPU models.
* [Det.Log] CheckBox now active, can auto create LOG file.
* [Info] Shows Camera DCC settings and Status (for both Cameras)
* [PM Edit] Revised: Read/Write DCC, Simlock Data, Parallel Model.
* Increased PM read default margins, to have DCC in read PM for DCT4+
* [Check Ask/Rpl] to Check Ask/Rpl files contents (Asic 2,5,6,7)
* Fixed [Format] bug for new BB5 Symbian products.
* ENO File flashing support (E63,E66,..,N97,..)
* [Locks] for BB5 remade, now calculate codes for SLPA and SL20
* [Check] Shows PASUBTOC SL related contents.
Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.
LG GSM V 2.0.10.0
——————
* MTK GB160,GB165,GB170,GB175,GB190,GB195,KG198 added.
* Infineon GB101,GB109,GB110,GB125,GB130,KE858,KP108 added.
* Infineon New Flash Chip SV7E3204UTA support.
* ADI KG129,KG248,KG298 added.
* " Cannot open file " Bug Fixed.
SAMs V 2.0.10.0
—————-
TRIDENT
C158,C158B,C188L,C240L,C258,C260B,C260L,C260M,C300 B,E576,E758,
X138,X180,X468P,X478,X568 added (DUNL,IM,FL)
USB flashing introduced for HPE models (U600,.. Approx. 2x faster)
TRIDENT VISION
B3210,B3310,B3313,C3010S,C3050C,C3053,C3060,C3110H ,M620N,
S3030C,S3500C,S3500H,S3500i,S3501C,S5150,S5150C added (CUNL,IM,FL)
MSL3 bypass introduced (B3210,B3310,B3313,C3060,C3060R,…)
USB UI functions introduced, allows to unlock USB only phones.
USB flashing introduced (Approx. 5x faster)
(Cannot use USB flashing of dead phones which have UL erased or damaged.
RJ45 flashing can be used to recover from erased UL situation)
SWIFT
A177,A226,A227,A237,A257,B3410,B5702,B5712C,B5722, B5722C,C3212,
C3510,C3518,C6112,C6112C,D980F,E200E,E208B,E250L,E 848i,F118,
F278,J150B,M2710,M2710C,M2710L,M3510C,S3100,S3110, S3110C,
S3600C,S3600H,S5200C,T219,T329,T729 added(UNL,IM,FL)
Added ENG flashing for DUOS FOTA models (D988,B5712C,..)
Auth. Boot and Firmware Sign. for Secure models (B5722,C3510,C6112,S3100)
B5702,D988,F265L,S5050 (SECT) bug fixed.
CSC Area format added.
SWIFT-AEROFONE
A137,CC01i,E1070C,E1100C,E1101C,E1107,E1113C,E1120 C,E1210,
E1310C,E1310E,E1360,E1360C,E1360S,E2100C,E2210C,E2 210H added (DUNL,IM,FL)
E1080,E1080C,E1080T,E1085,E1085L,E1085T,E1088C,E11 00H,E1150,
E1150C,E1160,E2120,E2120B,E2120C,E2130 added (CUNL,FL)
SWIFT-3G
C5110,C5130,C5130S,C5130U,J800R added (CUNL,FL,SECT,BT)
P270 (CUNL,SECT) bug fixed.
E2P Write is supported only for C5130,C5130S and C5130U.
QUALCOMM
A551,A561,A637,A746,A747,A766,A767,A811,A821,A827, A836,A837,
A867,C5220,C5510H,C5510U,G508,G508E,M7600B,M7600H, S5350,
S5600B,S5600L,S5608U,S5510,S7120U,S7350C,S7350E,S7 350F,
S7350H,S7350i,S7520U,S8300H,T469,T659,T749,T919,T9 29,U808 added.
Fixed flashing of non page size aligned files (rc1,rc2,ffs)
Added flashing support for QSC62xx models.
UNLOCK and UNFREEZE added for these models:
A551,A637,A767,A827,A837,C5220,F400,S5510,S7350,S7 350C,
S7350F,S7350i,T639,Z170,Z240E,Z360,Z720,ZV40
BROADCOM
QC Legacy BroadCom models introduced:
i6220,S3650,S3650C,S3650M,S3650W,S3653,S3653W,S523 0,S5230G,
S5230H,S5230M,S5230W,S5233A,S5233S,S5233T,S5233W,S 5560,S5560C,
S7070 (CUNL,FL) To read codes use:
[Mobile Info] button using USB Cable (Phone Switched-ON)
and after [QCDI Info] button, using RJ45 Cable (Phone-OFF)
QC Legacy BroadCom models Full Flashing (with BOOT Change)
[BOOT Repair] for QC Legacy BroadCom models added.
Boot Repair and Codes Read is possible only for phones with
NM_20 pin USB/RJ45 connector !
COMMON
Log to file added.
CLONE error message fixed.
25/03/10ï¼HWK Release
The Official release is ready in our download area http://sarunasoftware.com.
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
UFS_DCTxBB5 v2.0.10.1
-----------------------
1. RM-392,RM-393 (2680s-2,2680s-2b) v6.17 unlock bug fixed.
2. Box Init bug after BB5 flash fixed.
Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.
24/03/10ï¼HWK Release
The Official release is ready in our download area http://sarunasoftware.com.
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.
You MUST update your HWK using client 2.0.10.0, old client versions will no longer work.
You MUST be running HWK software 2.0.10.0 to access support.
UFS_DCTxBB5 v2.0.10.0
-----------------------
1. New BB5 products:
RM-381,RM-455,RM-468,RM-492,RM-529,RM-530,RM-570,RM-573,RM578,RM-579,RM-584,RM-599,RM-600,RM-635
(6750-1,6350-1b,5730s-2,6790s-1b,E72-2,E72-1,3208c,6760s-1,2730c-1,2730c-1b,E72-5,6790s-1c,E63-5,2690)
2. New DCT4+ products: RM-590,RM-591 (2220s-2,2220s-2b)
3. More DCT4+ added for unlock (ASIC 3168) see corresponding list.
4. McuSw tag fixed in vpl parser.
5. Fixed time-out bug for some RAPU models.
6. [Det.Log] CheckBox now active, can auto create LOG file.
7. [Info] Shows Camera DCC settings and Status (for both Cameras)
8. [PM Edit] Revised: Read/Write DCC, Simlock Data, Parallel Model.
9. Increased PM read default margins, to have DCC in read PM for DCT4+
10.[Check Ask/Rpl] to Check Ask/Rpl files contents (Asic 2,5,6,7)
11.Fixed [Format] bug for new BB5 Symbian products.
12.ENO File flashing support (E63,E66,..,N97,..)
13.[Locks] for BB5 remade, now calculate codes for SLPA and SL20
14.[Check] Shows PASUBTOC SL related contents.
Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.
LG GSM V 2.0.10.0
------------------
1. MTK GB160,GB165,GB170,GB175,GB190,GB195,KG198 added.
2. Infineon GB101,GB109,GB110,GB125,GB130,KE858,KP108 added.
3. Infineon New Flash Chip SV7E3204UTA support.
4. ADI KG129,KG248,KG298 added.
5. " Cannot open file " Bug Fixed.
SAMs V 2.0.10.0
----------------
TRIDENT
C158,C158B,C188L,C240L,C258,C260B,C260L,C260M,C300 B,E576,E758,
X138,X180,X468P,X478,X568 added (DUNL,IM,FL)
USB flashing introduced for HPE models (U600,.. Approx. 2x faster)
TRIDENT VISION
B3210,B3310,B3313,C3010S,C3050C,C3053,C3060,C3110H ,M620N,
S3030C,S3500C,S3500H,S3500i,S3501C,S5150,S5150C added (CUNL,IM,FL)
MSL3 bypass introduced (B3210,B3310,B3313,C3060,C3060R,...)
USB UI functions introduced, allows to unlock USB only phones.
USB flashing introduced (Approx. 5x faster)
(Cannot use USB flashing of dead phones which have UL erased or damaged.
RJ45 flashing can be used to recover from erased UL situation)
SWIFT
A177,A226,A227,A237,A257,B3410,B5702,B5712C,B5722, B5722C,C3212,
C3510,C3518,C6112,C6112C,D980F,E200E,E208B,E250L,E 848i,F118,
F278,J150B,M2710,M2710C,M2710L,M3510C,S3100,S3110, S3110C,
S3600C,S3600H,S5200C,T219,T329,T729 added(UNL,IM,FL)
Added ENG flashing for DUOS FOTA models (D988,B5712C,..)
Auth. Boot and Firmware Sign. for Secure models (B5722,C3510,C6112,S3100)
B5702,D988,F265L,S5050 (SECT) bug fixed.
CSC Area format added.
SWIFT-AEROFONE
A137,CC01i,E1070C,E1100C,E1101C,E1107,E1113C,E1120 C,E1210,
E1310C,E1310E,E1360,E1360C,E1360S,E2100C,E2210C,E2 210H added (DUNL,IM,FL)
E1080,E1080C,E1080T,E1085,E1085L,E1085T,E1088C,E11 00H,E1150,
E1150C,E1160,E2120,E2120B,E2120C,E2130 added (CUNL,FL)
SWIFT-3G
C5110,C5130,C5130S,C5130U,J800R added (CUNL,FL,SECT,BT)
P270 (CUNL,SECT) bug fixed.
E2P Write is supported only for C5130,C5130S and C5130U.
QUALCOMM
A551,A561,A637,A746,A747,A766,A767,A811,A821,A827, A836,A837,
A867,C5220,C5510H,C5510U,G508,G508E,M7600B,M7600H, S5350,
S5600B,S5600L,S5608U,S5510,S7120U,S7350C,S7350E,S7 350F,
S7350H,S7350i,S7520U,S8300H,T469,T659,T749,T919,T9 29,U808 added.
Fixed flashing of non page size aligned files (rc1,rc2,ffs)
Added flashing support for QSC62xx models.
UNLOCK and UNFREEZE added for these models:
A551,A637,A767,A827,A837,C5220,F400,S5510,S7350,S7 350C,
S7350F,S7350i,T639,Z170,Z240E,Z360,Z720,ZV40
BROADCOM
QC Legacy BroadCom models introduced:
i6220,S3650,S3650C,S3650M,S3650W,S3653,S3653W,S523 0,S5230G,
S5230H,S5230M,S5230W,S5233A,S5233S,S5233T,S5233W,S 5560,S5560C,
S7070 (CUNL,FL) To read codes use:
[Mobile Info] button using USB Cable (Phone Switched-ON)
and after [QCDI Info] button, using RJ45 Cable (Phone-OFF)
QC Legacy BroadCom models Full Flashing (with BOOT Change)
[BOOT Repair] for QC Legacy BroadCom models added.
Boot Repair and Codes Read is possible only for phones with
NM_20 pin USB/RJ45 connector !
COMMON
Log to file added.
CLONE error message fixed.
19/08/09－HWK Release
Release Date: 18/08/2009
The Official release is ready in our download area http://sarunasoftware.com.
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.
You MUST update your HWK using client 2.0.9.0, old client versions will no longer work.
You MUST be running HWK software 2.0.9.0 to access support.
UFS_DCTxBB5 v2.0.9.0
----------------------
1. New BB5 products: RM-424,RM-465,RM-469,RM-481,RM-482,RM-483,
RM-491,RM-504,RM-518,RM-547,RM-555,RM-561,RM-564,RM-566,RM-602
(6720c-1,5730s-1,E52-1,E52-2,E55-1,E55-2,6710s-1,5530c-2,3720c-2,
6730c-1VF,N97-4,2700c-2,6720c-1b,6730c-1,5800d)
2. New DCT4+ products: RM-519,RM-520 (2720a-2,2720a-2b)
3. New Samsung Flash Chip: 00EC2606 (K8S3215ETF)
4. Corrected VPL parsing for some models (N97)
5. Only NU48F256 left in [1331] option and moved to BB5 Tab.
6. SX4 bypass introduced using temporary NPC certificate erase.
7. [One Boot] option introduced (RAPx based One MCU products)
8. Enabled Files Multiselect, when Writing Certificates.
9. Erase Option for BB5 (for Experts Use Only !)
Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.
LG GSM V 2.0.9.0
-----------------
1. Unlock Codes Display for Infineon EGOLD Voice added
(Boot and See NCK Code for Instructions Press UNLOCK)
SAMs V 2.0.9.0
---------------
TRIDENT
T539 added (DUNL,IM,FL)
TRIDENT VISION
Fixed MSL algorithm for some models (C3050,...)
SWIFT
D606,D900E,E260,M2310,P220,S366,S5050,S5200 added(DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B270i,C276,C276L,E1070M,E1070T,E1075,E1075L,E1105T ,E2100B,
E2210B added (DUNL,IM,FL)
QUALCOMM
Manual Port Selection Added
(Use Refresh, After Each Phone Reboot or Reconnect)
(Untic QualComm Mode, Before Flashing)
F480R,i6210,U900W added.
UNLOCK and UNFREEZE added for these models:
A736,A737,F490,G800,G800L,M7600,S5600,U900W,Z400,Z 540
We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.
Conditions:-
1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.
Many thanks to all those who have supported us!!!
Odia.
www.sarasbox.co.uk
www.gsm-solutions.co.uk
Official SarasSoft Rapidshare Mirrors:-
http://rapidshare.com/users/VAY6Q3
08/06/09－HWK Release
Release Date: 08/06/2009
The Official release is ready in our download area http://sarunasoftware.com.
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
UFS_DCTxBB5 v2.0.8.5
----------------------
1. New BB5 products: RM-412,RM-413,RM-443,RM-505,RM-506,RM-507,RM-570
(E75-1,E75-2,6303c,N97-1,N97-5,N97-3,6600i-1)
2. Introducing RAPU-YAMA ASIC: RM-368,RM-431,RM-432,RM-470
(6260s-1,5630d-1,5630d-1b,6700c-1) support added.
3. New DCT4+ products: RH-512,RH-513,RH-514,RH-515,RH524,RH-525,RH-543
(2330c-2,2330c-2b,2320c-2,2320c-2b,5030c-2,5030c-2b,2323c-2)
4. New DCT4+ UNL versions support:
RH-99 v5.91, RH-100 v5.80, RH-105 v5.91, RH-106 v5.80, RM-305 v5.91
(1200, 1200b, 1208, 1208b, 1650)
5. Certificates write error in DL mode fixed.
6. Check is ASIC supported by firmware for DCT4 and WD2 products.
7. Read UEM IMEI or ESN for DCT-4/WD2 ASIC 2,5,6,11 when Rd UEM.
8. Added backup of PM 120 block when make Bk.308 (if exists)
9. Added [Skip Erase] option for BB5 products (for Experts Use Only)
10.Added [1331] option, to switch on/off NU48Fxxx Intel Chips Solution.
Do not use external VPP adapter with RX2 enabled cables, since this will put VPP direct to RX2 and its possible to KILL the phone.
LG GSM V 2.0.8.5
-----------------
1. MTK KG195,KP199,KP220 support added.
2. PCS files support added for MTK models.
3. Cable type indicator.
SAMs V 2.0.8.5
---------------
V 2.0.8.5
------
TRIDENT
B100K,C140i added (DUNL,IM,FL)
TRIDENT VISION
C3010,C3050,C3060R,C3110,C3110C,S3500 added (CUNL,IM,FL)
M120,M128,E1040,S3030 added (DUNL,IM,FL)
B520 Vodafone support added.
(use B520B-V model, not mix with B520, filenames are similar)
(Use [Reset MMI] if phone ask for password without SIM)
New MSL bypass algo introduced (B220,..,C3050,E1410,S3500...)
allows direct codes reading, unlock and IMEI repair.
MSL Repair introduced, allows to repair or use alien E2P
(Repair of "User Fault on Illegal Trial !!" and restore IMEI)
OM(SYSOL)
C160G added (DUNL,IM,FL,SECT)
SWIFT
B2100,C5212,E250i,F265L,F270,J700i,M158,P250,U800E ,X576
added (DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B100i,B210 added (DUNL,IM,FL,SECT)
C270,E1100,E1120,E1125W,E1125-SEA,E1210M,E1210S,E1310B,
E1310M,E1310S,E1360B,E1360M,E2100,E2210 added (DUNL,IM,FL)
(Do not mix B-C-M-L-S-T-EUR-SEA models! More info on support)
B130S,B130T flashing fixed (blinking or frozen phone)
(Must select target firmware as model, e.g. model is B130 and
want to flash B130S, select B130S as the model.)
SWIFT-3G
P270 added (DUNL,FL,SECT,BT)
QUALCOMM
A777,M7600,M7603,M8800C,M8800L,S5600,S5603,S8300N added.
[Write E2P] (NVM) added.
UNLOCK and UNFREEZE added for these models: A411,A777,S7220,
S7330,S8300,S8300C,Z230 (Use [QCDI Info] button to read keys)
Old models UNLOCK and UNFREEZE: Z300,Z500,..,ZM60,..
(these are not in models list, select any model. Use
[Mobile Info] button to read keys & [Unlock] to direct unlock)
We would like for some users to add localisation in their own native language to the software, localisation is added to SAMs only at the moment but will be added to other modules in future.
Conditions:-
1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the selected language, for example Chinese is not my native language and I would like someone to take over from me and finish/correct as required.
