E50 Classic Cable for UFS/UB

30/03/10－v1.02 - SETool update. ACTIVATION REQUIRED

v1.02 - SETool update. ACTIVATION REQUIRED.

- added preliminary support for a2 cid26 phones (s5320 at the moment)
- added a2 db3150,db3200,db3210 emptyboard fill support.
you need special cable in order to successfully write OTP chip, +7.5v should be applied to DCIO (charger pin, pin 12)

RapidShare: 1-CLICK Web hosting - Easy Filehosting

activation required in order to use that update.
just unpack 1.02.rar in existing setool2 directory
( setool2.ini not included in dist anymore, so your password/username will not be overwritten)
and run activator.exe.
RapidShare: 1-CLICK Web hosting - Easy Filehosting

15/03/10－Setool V1.01 Updated!

v1.01 FINAL

fixed a2 cid80 support

13/03/10－Setool v1.0 FINAL new update released

v1.0 FINAL

- added standalone support for reset operation, alternative security bypass for next chipsets:

supported s1 aid 0001,0002,0003.
supported a1/a2 cid 16,29,36,49,50,51,52,53,80

Code:

  s1 omap
  s1 locosto
  s1 neptune
  db 200x
  db 201x
  db 2020
  db 3150
  db 3200
  db 3210
  db 3350

26/02/10－setool update v0.915062

v0.915062

- broken pnx5230 support,fixed
- solved "starting up..." hang issue when user installed usbflash drivers, but not connected any phone yet.

25/02/10－setool update v0.915061

v0.915061

- added support for S1 AID04 neptune-based phones.
there is no alternative security bypass for such phones, so only full network unlock supported.
- added support for A2 CID80.
there is no alternative security bypass for such phones, so only full network unlock supported.
- few bugfixes.
download from support
br

02/12/09－Setools Release v0.915057

v0.915057

- added support for repair dead db3200-based lg phones (gt505,etc)

procedure:
if /sys partition damaged
(you CAN'T read gdfs, eraseSecData errors)
add to firmware area gt505_syspart_fix.ssw
press flash
unlock phone
fullflash phone

if /drm partition damaged
(phone blinks on lg logo after /sys repair and you CAN read gdfs)
add to firmware area gt505_drm_fix.ssw
press flash
unlock phone
fullflash phone

- added support for repair semc a2 phones with flash cid>otp cid
procedure:
check "use signed mode",
"use alternative security bypass",
"use preloader security bypass"
press unlock
credits consumption same as a2 cid53 unlock feature.

09/11/09－Se tool update v0.915056

v0.915056

- added full support for s1_open PDA phones (satio).
big thanks to: cowboy, hardstone, shadowman,kris.sg for testing,
arash for logo.

notes:

in order to boot satio you MUST check "signed mode"
read flash requires "signed mode" and "alternative bypass" checked.
satio omap nand flash starts at 8000000

to execute network unlock/repair - check
both "signed mode" and "perform full unlock" then press unlock

to reset user code - check only signed mode and press unlock
if "unlock after flash" checked - user code will be reset after flashing.

to flash satio you must add zip package to firmware area.
do not unzip it !!!! just add.

- added possibility of generating new password for account.

09/10/09－SETOOL UPDATE v0.915053

v0.915053

- a2 cid53 alternative bypass will not damage device key anymore.
because of that one more phone restart required, but who cares ?

- "unlock during flash" enabled for s1 phone patch unlock

- some not important fixups, thx to imobile for bugreports.

rapidshare FULL SETUP LINK : http://rs649l33.rapidshare.com/files.../v0.915053.rar

http://rapidshare.com/files/290416065/v0.915053.rar

08/10/09－Setools Updates v0.915052

v0.915052

- tested,fixed and apporved support for db3350 phones, thx to imobile
as my "dear friends" used to say: world first, genuine,blablabla,etc.
anyway, i'm sure everything works now for db3350 -
- full signature unlock
- altbypass mode
- flashing,filesystem,gdfs,trim area operations.

- regarding a2 cid53 phones:
use full signature unlock for FULLY GENUINE unlock.
it is fast and furious (tm)
use alternative bypass mode for completely damaged phones.
it is slower, but can fix any software problem.

in next 2-3 days i will release next version, which will not damage
device key in a2 cid53 phones when using alternative bypass mode.
(need to arrange reset station upgrade, that require some time)

in any way, i strongly recommend to use full signature unlock for
a1/a2 phones - it is absolutely genuine and can not tamper anything.

28/09/09－SETOOL UPDATE v0.915051

v0.915051

- added full support for upcoming semc db3350 phones.
as there are no phones on market, we can not test it,
so support for db3350 marked as HIGHLY EXPERIMENTAL.

flashing/gdfs/filesystem operations should work flawlessly.
full unlock via signature and "alternative bypass mode" SHOULD work too,
but that things are absolutely not tested, so
MAKE GDFS BACKUP before doing full unlock
and only touch alternative security bypass if you absolutely crazy
in any case, if phone will be killed - i will repair it for sure...
well, you have been warned.

please note, that alternative security bypass for a2 db3350 cid53
IS NOT free and NOT STANDALONE (check prices for details)

please note, that if you will execute alternative bypass mode for a2 cid53
in order to unlock/flash/etc - you will lose device key and
drm functions possible will be damaged.

- in some VERY RARE cases lg db3200 phones became completely dead
after unlock attempt or unlock/flashing procedure failed in start.
that should be fixed now, at least i received many good reports.

09/04/09－Setool News !!! S1 Unlocking Enabled.

s1 network unlock enabled for both servers.

that means, users can unlock locosto-based semc phones with "bugfixed mcu"
and neptune-based phones.

to make full unlock user should check both
"signed mode" and "do full unlock instead usercode reset" settings.

first stage (signature calculation) will consume 2 credits.
second stage (unlock) requires at least 1 credit on account, but will NOT consume credits.

service NOT working all 24 hours, so try your luck...:-)

ps.
big thanks goes to my friend eerchant, without him implementation of s1 unlock will take ages


Originaly published by the_laser here: http://www.mobile-files.com/forum/sh...&postcount=322

09/04/09－Setool v0.915030 Released

09/04/09－SETOOL v0.915029 - update

SETOOL v0.915029

- a2 flashing speed increased ~15%
- enabled error correction protocol for semc a2 phones
- again lowered altbypass speed of locosto-based phones to 460800
- misc unimportant changes/cosmetic bugfixes

rapidshare 028-029 UPDATE (VERY SMALL SIZE):
http://rapidshare.com/files/17757031..._v0.915029.exe

rapidshare FULL SETUP:
http://rapidshare.com/files/177570318/v0.915029.rar

08/04/09－Setool v0.915028 Released

08/04/09－Setool v0.915027 Released

08/04/09－Setool v0.915026

- fixed db201X recovery bug
- fixed nasty cosmetic bug in general unlock procedure
- still should be more bugs


rapidshare FULL SETUP LINK

07/04/09－SETool New Update v0.915020

07/04/09－Setool v0.915019 Released!

v0.915019

- possibility to repair total damaged a2 phones (err: 060101)
- latest bypass packages added
- misc bugfixes

please note.
there is common now to make mirrrors and etc of
setool2 updates.

be content to know, that i do NOT guarantee that ANY of that
mirrors NOT contains viruses,mailwares,whatever.

the ONLY 100% genuine updates are on support area and in that thread.

06/04/09－Setool new update a2 unlock free !! !! !!

v0.915016

- updated phone model names
- updated bypass packages
- minor and major bugfixes
- added script command for visual filesystem manipulating.

- added support for j132 ODM SEMC phone

- added support for unlock/repair/domain change of
ALL CURRENT SEMC A2 phones (cid49,51,52)
solution is standalone. please FULLY read THIS POST

- added support for flash/fstools/unlock/repair of LG EMP-based phones,
at the moment ku580/kf75x/kt52x (cid54) are supported.

- added support for flash/fstools/unlock/repair of SAGEM EMP-based phones,
at the moment my850c (cid60) is supported.

03/04/09－SETOOL v0.914041

Hello,

Code:
v0.914041

- fixed old security PDA standalone support
- updated bypass packages
- minor bugfixes

rapidshare LINK

03/04/09－Setool Update v0.914040

01/04/09－SETOOL v0.914039 Released

01/04/09－SETool 0.914038

Hi,

v0.914038

- added SCRC testpoint repair for db2012 phones.
  supported CIDs : 50,51,52,53.
 (db201x testpoint idea made by dre_ambox team). 
  usage: 
  1. it is only and only for professionals. 
     users,advanced users, please "go away".
  2. testpoint is +3.3 voltage, connected to specific pin. 
     we suggesting to use +3.3v battery 
     (battery ground MUST be connected with phone's GROUND)
  3. go to emptyboard fill & repair.
  4. select needed db2012 model.
  5. press "TP STAGE #1". read instructions and execute them.
  6. phone is BROWN now. 
  7. now flash CORRECT db201x erom with needed CID.
  NOTE, THAT EROM CID SHOULD BE >= OTP CID,OTHERWISE YOU WILL GET DEAD PHONE.
  10. phone now retail,repaired and unlocked. fullflash phone as usual.
  testpoint pictures (courtesy of drea_mbox team) included. 
  as all db201x shares same mcu, w200 testpoint picture is good 
  for all db201x phones.
  IF YOU WROTE EROM WITH INCORRECT CID - USE "TP STAGE #2"

  PLEASE NOTE, THAT CURRENT IMPLEMENTATION REQUIRES
  VALID GDFS STRUCTURE. SO, IT SITUABLE ONLY FOR 5-LOCKS 
  REPAIR AND FULL STANDALONE UNLOCK. 

- added all possible db201x eroms, now users can make cid50/51/52/53 
  phones from emptyboard phones 
 (not forget: add to firmware area gdfs_in_ssw FIRST and EROM LATEST)
- minor bugfixes.

Download Link
http://rapidshare.com/files/13640878...14038.rar.html

db201x testpoint can't be possible without GREAT help from SPH

warning ! our solution can easily fix phones, killed with 
"kukuruzer zuide software" (based on solutions,stoled from setool2)

30/03/09－SETool v0.914037

v0.914037

- added testpoint for db2020 phones.
  db2020 testpoint idea made by dre_ambox team. 
  as i respected that, i not included db2020 testpoint in setool2 
  for a long time. but anything ends sometime.
  now, setool2 users can enjoy gdfs db2020 gdfs repair.

  usage: 
  1. it is only and only for professionals. 
     users,advanced users, please "go away".
  2. testpoint is +3.3 voltage, connected to specific pin. 
     we suggesting to use +3.3v battery 
     (battery ground MUST be connected with phone's GROUND)
  3. go to emptyboard fill & repair.
  4. select any db2020 model.
  5. press "TP STAGE #1". read instructions and execute them.
  6. press "TP STAGE #2". read instructions and execute them.
  7. phone is BROWN now. 
  8. staying on "emptyboard fill and repair" write correct gdfs_in_ssw format.
  9. if flashing went fine, flash db2020 erom with needed CID.
  10. phone now retail and repaired. fullflash phone as usual.
  testpoint pictures (courtesy of drea_mbox team) included.
  after SETOOL2 db2020 testpoint procedure phone FULLY 
  working in "alternative security bypass" mode without ANY restrictions.

- greatly decreased locosto-based SEMC ODM phones security bypass time.
  (instead ~50 seconds, now we have ~18 seconds)
- minor bugfixes.

RAPIDSHARE LINK

db2020 testpoint can't be possible without GREAT help from SPH 
and inspirations from vasilius

warning ! our solution can easily fix phones, killed with 
"kukuruzer zuide software" (based on solutions,stoled from setool2)

27/03/09－SETOOL UPDATE v0.914036

v0.914036

- added support for new locosto-based ODM phones - T270,T280,R300,R306,T303,etc.
supported flash,correct unlock by patch,usercode reset.
be careful - select CORRECT model and CORRECT flashfiles.
- updated phone model names
- minor bugfixes

27/03/09－SE-TOOL NEW UPDATE v0.914035

SE-TOOL NEW UPDATE v0.914035

http://setool.net/support/area

http://rapidshare.com/files/12171893...14035.exe.html