N3109/N6300/3110C/3500 Cable for UFS/UB

No reviews

17/06/09－Genie BB5 logger - RAP3 phones supported!

Hi,

There is a new version of the BB5 RPL logger for Genie. Now we support all RAP3
Nokia phones. With this version almost all BB5 phones are supported for simlock
repair via RPL file.



More info about the Genie RPL logger here.

Discussion thread for users to post questions and logs here.

Enjoy, B-phreaks

15/04/09－Genie Universal Permanent Memory Tool v0.3 released!!!

15th April 2009

Permanent Memory Tool v0.3 released!!!



- SX-4 Authentification via online SX4
- Full Permanent Memory erase added
- Improvement on reading phone information
- Bugs fixed on SX4 authentification time-out
- Read/Write of RAP3v3 model (5310,6500,6600, etc) bugs fixed

How to use?
1) Make sure Phoenix or FLS-5 drivers is installed in your PC
2) Run Fls5.exe in Genie Universal device.
3) Attach your phone on Genie
4) Click "Connect" on Genie Permanent Memory Tool (Make sure phone in Local Mode)
5) Click "READ" to read full PM or click "Write" to write selected PM.

**REMEMBER TO MAKE BACKUP OF PHONE PM BEFORE USING Full ERASE!!!
**All BB5 Phones PM write is required for SX4 Authentification
**For SX4 Authentification, make sure your internet is ON!

15/04/09－VYGISTOOLBOX: Added ZTE F866 new version unlock - LGQ133

New version - LGQ_1_33SC is uploaded at support sites in LG section.
Added ZTE F866 new version unlock.

14/04/09－ Genie Universal new version of BB5 No Test point application

v 0.0.0.110 - 26.03.2009

- RAP3 SL2 unlocking is completely free
now, no need to keep 200 credits to be
able to use it. Please feel free to use
them for other services like RAPIDO SL2
or DCT4+ RPL
- Some quick fix on the 5800 unlock problem
the code will be saved to the card. If you
get success on unlock, but phone is still
locked, please do not try to do it second
time as this will eat another 50 credits.
Just run the provided script to enter the
saved code again and unlock

Please use the Genie Update utility to get the latest version on your device

14/04/09－Genie Universal FTP Support Tool v0.3 Released!

Genie FTP Support Tool Released v0.3 - 24th March 2009

- Options on type of region added.
- Europe FTP server added.
- Improvement on VCOM auto search.

Download Link: http://www.genie-universal.com/?page_id=10

10/04/09－NsPro v5.0.8 released

09/04/09－GENIE UNIVERSAL RPL CALCULATER on way 0.0.0.151r

This is the latest version available of the Genie Firmware.

Whats new:

-----------------------------
v 0.0.0.151 - 20.01.2009

- Support for latest Genie SDK
v 0.8 added

09/04/09－ Genie Firmware update v 0.0.0.149

Genie Firmware update v 0.0.0.149

- Support for x512
- Bug fix when was impossible to start
driver due to fragmented memory
- Support for application credits
This will allow each application to access
common credits file in the System folder
(credits.cnt)
- Major update on the OS. Two drivers are
removed from the os build and compilied as
separate extension applications - USB disk
driver and Genie OS update driver. From this
version you will need to have 2 files in
System: gMsd.sys and gUpd.sys to have full
functionality
*Genie’s SD card update is required!

New application released:

NkCS.exe v 0.0.0.8 - 02.01.2009

This program can fix contact service due to
bad product signature. Supported models:

- NHL-4JX
- RM-37
- RH-71
- RM-193
- RM-154

The application will repair Contact Service permanent, no need to patch
flash(It will stay repaired after flash too). Each repair cost 12 credits.

--------------------------------------------------------------------

Please update your SD card and update OS to latest version. The old
BB5NoTp.exe is not compatible with the new version so please make sure
all is upto date.

09/04/09－NsPro v5.0.5 released

08/04/09－NsPro v5.0.4 released

Added A867, B2700, E2510, J770, M3200, M3510 support.






New version is available on official NsTeam website: www.nsteam.org/download.html


And on Rapidshare: http://rapidshare.com/files/174024821/NsPro_v5.0.4.exe

WBR - rotelcam

08/04/09－Genie Universal's Phoenix Service Software 2008 44 5 36625 Released

This installation package contains the following components:
- Connectivity Cable Driver v 7.1.6.0
- Flash Update 08.45.16
- FLS-x Drivers v 2.09.20
- DK2 Dongle Driver v 7.14.0.25

Changes in version 2008.44.5.36625 for GSM/WCDMA phones
New features and error corrections:
· New products added:
RM-525, RM-487, RM-431, RM-432, RM-433, RM-434, RM-505, RM-506,
RM-507, RM-519, RM-520, RM-514, RM-515, RM-512, RM-513, RM-524
RM-424, RM-465, RM-468, RM-452, RM-428, M-412, RM-413, RM-492
· Flash Update 08.45 is added
· N95 Tucson errors are fixed
· Label printing of the phone with MAC address with USB connation is fixed.

Known Errors:
Notice for prommer version 008.045.016
If you are experiencing problems upgrading your prommer version, you will have to
delete the old prommer software before you can install the new version. Just follow
these steps to get this to work:
Step to install new prommer software
· In Phoenix, select the prommer under Manage Connections.
· Open Prommer Maintenance under the Flashing pull down menu and then
open FPS-X Configuration on the bottom of the box.
· Under Media Formatting, select the Internal CF option then press the OK
button to start the format.
· After the format completes, close then reopen Prommer Maintenance. This
time you will get a prompt asking for you to upgrade prommer version and
show “unknown” for the previous version. Select to install the new version.
· FLS-5 has limited capabilities with BB-5 phones (E71, N79, N81, and N96) “boot code is
invalid” error may occur.
· Multiflash has limited capabilities
o Launch Multiflash UI first and then connect phones one by one
o Do not attempt to service more than 5 phones at a time

Changes in version 2008.44.5.36625 for CDMA phones
New features and error corrections:
· None
Known Errors
· FPS-11 should not be used to revive “dead” Phones.
General information
· First time Phoenix installation may take a longer time.
· Type labels now can be printed without any special dongles.
· Auto creation of phone data XML-file is an alternative of the fault-log module, and the
path for saving the XML files can be modified with the new UI under
Tools>Options>Phone Info XML files setting menu.
· Rebuilding IMEI/ESN, SIM lock requires Smart card, SX-4 with rebuild access rights
enabled. Please send your SX-4's serial number to your regional security officer if you
need these rights.
· Rebuilding ESN/IMEI with FPS-8 now requires a SX-4 card to be used. An external
smart card reader is needed when using the FPS-8.
· Auto-tuning requires a user registered and activated SX-4 card.
· Changing product codes and restoring certificates in BB-5 products may require the
SX-4 card to be reregistered with your security officer.
· BB5 products cannot be flashed using the FPS-8 except RM-1.
· Preferred connection to FPS-10 is by the LAN port.
· The preferred connection to FLS-4S is using the USB port.
· In order to use Willtek 4400 for auto tuning, we recommend updating the Willtek with a
new PC; minimum firmware version of the Willtek 4400 must be ver.12.30. For further
information and required HW options please contact your local Willtek sales
representative or e-mail to mailto:support@willtek.com
· NFPD (Nokia Flash Prommer Device) is the new connection name for FPS-10 and FPS-21.

Assemblies Affected
All GSM, WCDMA, TDMA, and CDMA phone models mentioned on page 2 of this
technical bulletin.
Special Equipment:
In order to use Phoenix with phone models supported by it, you need to use
1. Latest Phoenix Service Software 2008.44.5.36625 or newer, which includes all
needed drivers and flash support files.
2. Latest product specific Phoenix Data Package or Flash Bundle
3. Flash Update Package for FPS-21/FPS-10/FPS-8/FLS-4S/FLS-5 (v 08.06.001 included
in the package)
4. JBV-1 Software Update v 18 or newer (See ASB_AST_009.PDF (NOL > Support
Library > APAC – Service Software & Bulletin > Drivers & Bulletin > JBV-1 & Bulletin);
not valid for JBV-1 RoHS compliant)
5. Parallel Port Driver for FPS-8 if you experience slow file transfer speed via LPT port
(See ASB_AST_071.pdf (NOL > Support Library > APAC – Service Software & Driver >
Drivers & Bulletin > FPS-8 General Bulletin))
6. PK-1 or PKD-1 Dongle OR FLS-4S/FLS-5 POS Flash Dongle
7. Programming devices for updating the phone software
8. Product specific service tools
· A complete Phoenix service software installation package always includes the
latest drivers and flash update files available at the time of the release.
· Please use separate driver or flash support file installation packages only if
updates occur between complete Phoenix releases.
For details of installing each package, please refer to product specific Service Manuals and
Technical Bulletins concerning each mentioned update package.

Procedure
How to install new Phoenix 2008.44.5.36625
1. Download phoenix_service_sw_2008.44.5.36625.exe application file to your
computer (e.g. C:\TEMP).
2. Close all other programs.
3. Run phoenix_service_sw_2008.44.5.36625.exe and follow instructions on the
screen to install Phoenix Service Software
4. Connect a dongle (PK-1, PKD-1, FLS-4S, FLS-5) when message appears on the
screen
5. If you are prompted to update any existing driver or file versions, select “yes”.
6. Depending on the operating system, the PC may require rebooting.
7. Allow Windows to register the Phoenix components.
8. Open Phoenix and update your prommer with the latest software included in this
installation package.
9. Use the latest available product specific data packages or flash bundles with new
multi-protocol Phoenix.
Tuning Instruction
None
Notes
This product includes software developed by the OpenSSL Project for use in the OpenSSL
Toolkit (http://www.openssl.org/).
Copyright (c) 1998-2005 The OpenSSL Project. All rights reserved.
Copyright (c) 1995-1998 Eric Young (eay@cryptsoft.com). All rights reserved.
OpenSSL license text can be found from http://www.openssl.org/source/license.html.

08/04/09－NS MULTI-UNLOCK v2.3.0 Omnia i900 DIRECT UNLOCK

08/04/09－Genie Universal Firmware Update v0.0.0.146r

This is the latest version available of the Genie Firmware.

Whats new:

-----------------------------
v 0.0.0.146 - 02.12.2008

- Now it is possible to put the
device in Sleep mode by pressing
and holding the '1' key for 4 seconds
This will reduce power consumption and
act as off mode as requested by many users
Current power consumption on release devices
in main menu from battery is:

- nomal mode/lcd on: 77 mA
- nomal mode/lcd off: 42 mA
- sleep mode/all off: 14 mA

NOTE: Removing the SD card will decrease the
Sleep power consumption to 10 mA!

- Bug fix on flashing Pawn api
- Fixes on LCD backlight off and Sleep timeouts


For full information about the changes please check History.txt

How to update:

- If clip version is lower then 0.134:

1. Download. Put your SD card in a reader connected to your PC
2. Extract and put osimg.sef on you SD card (in System)
3. Put the card back in Genie, make sure you have charger plugged in
4. Click on Mode (right button) from main screen
5. Select Firmware Update

- If the clip version is higher then 0.134 you can use the USB Disk mode
to put the new osimg.sef file on the card

1. Plug Genie to PC via Mini USB cable
2. From the main screen click 'Mode'
3. Then select 'Usb Disk'
4. After 3-4 seconds a new disk will appear
5. Extract and put osimg.sef in System
6. Press 'Back', wait for Genie to restart
7. Click on Mode (right button) from main screen
8. Select Firmware Update(make sure you have charger plugged in)

Genie should reboot after few seconds and show the new version
on screen.

If you receive any error:

1. Try to HW restart Genie and try again.
2. Open the back lid and check if the battery is connected.

07/04/09－ Genie Universal MORE BB5 RAPIDO Processor Unlock & Relock Supported!!!

- BB5 No TP Tool v0.0.0.94 released
*Two new hashes supported for RAPIDO Processor on NAND and NOR chips!
Phone model with two new hashes supported:
5700 (RM-230)
5700 (RM-302)
6290 (RM-176)
N76 (RM-135)
and more…


BB5 No TP Tool v0.0.0.94 supporting model:

RAP3 v2 Processor Supported:

N70 (RM-84)
N71 (RM-112)
N72 (RM-180)
6680 (RM-36)
6681 (RM-57)
6682 (RM-58)
and more…

RAP3v3 Processor Supported:

3109c (RM-274)
3110c (RM-237)
3250 (RM-38)
3500c (RM-272)
3500cb (RM-273)
5200 (RM-174)
5200b (RM-181)
5300 (RM-146)
5300b (RM-147)
5500 (RM-86)
6085 (RM-198)
6086 (RM-188)
6086b (RM-260)
6125 (RM-178)
6126 (RM-126)
6133 (RM-126)
6131 (RM-115)
6131 NFC (RM-216)
6136 (RM-199)
6151 (RM-200)
6233 (RM-145)
6234 (RM-123)
6280 (RM-78)
6300 (RM-217)
6300I (RM-337)
6300b (RM-222)
7370 (RM-70)
7373 (RM-209)
7390 (RM-140)
8600 (RM-164)
E50 (RM-170)
E50 (RM-171)
E50 (RM-172)
E61 (RM-89)
E61i (RM-227)
E62 (RM-88)
E65 (RM-208)
N73-1 (RM-133)
N73-5 (RM-132)
N75 (RM-128)
N77 (RM-194)
N80-1 (RM-92)
N80-3 (RM-91)
N92 (RM-100)
and more…..

Rapido Processor supported.

N95 (RM-159)
N95 (RM-245)
N95 (RM-160)
5700 (RM-230) -Fixed
5700 (RM-302) -Fixed
6290 (RM-176) -Added
N76 (RM-135) -Added
E90 (RA-6)
and more ……



*Download GenieClient.exe to update SD card content to receive new update!
*Download from RapidShare: GenieClient.exe
**VERY IMPORTANT NOTICE: If you don’t have Genie Box, BUY 1 NOW TODAY! More hot and promising updates coming up soon…

07/04/09－Genie Universal CCS3 Tool released!

Genie CCS3 Tool released!!!

Features:
- Flashing different CPC phones and dead phones caused by bad flashing
- Service Programming PRI, PRL, ERI and so
- Load Default Data
- Flex Graphic/Tones
- Backup phone book
- Backup Flash Memory
- SID settings
- Unlock
- Relock
- Repair
- Tunning
- Testing


Supporting Nokia ODM Model:

N1255 (RH-79)
N1315 (RH-96)
N6066 (RM-211)
N6088 (RM-218)
N7088 (RM-219)
N1265 (RH-103)
N1325 (RH-104)
N2505 (RM-307)
N2135 (RH-107)

*Download “GenieClient.exe” to update SD card content!
*Download CCS3Tool.exe from FTP support

07/04/09－Genie Universal BB5 No TP Tool v0.0.0.93 Released With RAP3v2 Processor Added

15th November 2008
- BB5 No TP Tool v0.0.0.93 released!
*Support for RAP3 v2 Processor added

Supporting phone model:

RAP3v2 Processor Supported:

N70 (RM-84)
N71 (RM-112)
N72 (RM-180)
6630 (RM-1)
6680 (RM-38)
6681 (RM-57)
6682 (RM-58)
and more........

RAP3v3 Processor Supported:

3109c (RM-274)
3110c (RM-237)
3250 (RM-38)
3500c (RM-272)
3500cb (RM-273)
5200 (RM-174)
5200b (RM-181)
5300 (RM-146)
5300b (RM-147)
5500 (RM-86)
6085 (RM-198)
6086 (RM-188)
6086b (RM-260)
6125 (RM-178)
6126/6133 (RM-126)
6131 (RM-115)
6131 NFC (RM-216)
6136 (RM-199)
6151 (RM-200)
6233 (RM-145)
6234 (RM-123)
6280 (RM-78)
6300 (RM-217)
6300I (RM-337)
6300b (RM-222)
7370 (RM-70)
7373 (RM-209)
7390 (RM-140)
8600 (RM-164)
E50 (RM-170)
E50 (RM-171)
E50 (RM-172)
E61 (RM-89)
E61i (RM-227)
E62 (RM-88)
E65 (RM-208)
N73-1 (RM-133)
N73-5 (RM-132)
N75 (RM-128)
N77 (RM-194)
N80-1 (RM-92)
N80-3 (RM-91)
N92 (RM-100)
and more........

Rapido Processor supported.

N95 (RM-159)
N95 (RM-245)
N95 (RM-160)
5700 (RM-230) - bugs fixing coming up
5700 (RM-302) - bugs fixing coming up
E90 (RA-6)
and more ......



-nkt.amx release
*New folder added to Programs called Script. It will contain
important scripts. The first released is nkt.amx - the cable
connection test that can detect bad service cables

*Please use GenieClient.exe to update your SD card content.
*Update Genie with latest firmware version v0.0.0.145r.

07/04/09－Genie Universal BB5notp.exe v 0.0.0.92 released!

12th November 2008

BB5notp.exe v 0.0.0.92 released!

- Now locking is possible, or unlocking with different SL table. Please download Winlock5 from support, install and read a desired lock from a phone. Save the
lock to a file, then put simlock.bin in ‘/Files/Nokia/Flash’ If you wish just
want to unlock, use the default file that is on your SD card after updating to the new version(no need to edit files)
- Improvments on parsing lock status
- ‘Unlock’ menu is called now ‘Upload’
to reflect the ability to lock phones
- small bug on releasing USB fixed

*Use GenieClient.exe to update your SD card content to receive the latest update.
*Firmware v 0.0.0.144 update required.


Firmware information:
- Support for Pawn v 3.3.4026 (2008-10-24)
added. Some new features like handling .ini
files is not yet supported, but scripts
compilied with the new version will run fine
- Some bugs from 0.143 fixed regarding crashing
of Pawn scripts

06/04/09－Genie Universal N95 Unlock bugs fixing

6th November 2008

- BB5 No Tp Tool 0.0.0.91 released!( Bugs fixing for N95 power supply control )

*Use “GenieClient.exe” to update SD card content for latest update release.

Check out this: LINK

Support most BB5 unlock!

Supporting Model:

RAP3v3 Processor Supported:

3109c (RM-274)
3110c (RM-237)
3250 (RM-38)
3500c (RM-272)
3500cb (RM-273)
5200 (RM-174)
5200b (RM-181)
5300 (RM-146)
5300b (RM-147)
5500 (RM-86)
6085 (RM-198)
6086 (RM-188)
6086b (RM-260)
6125 (RM-178)
6126/6133 (RM-126)
6131 (RM-115)
6131 NFC (RM-216)
6136 (RM-199)
6151 (RM-200)
6233 (RM-145)
6234 (RM-123)
6280 (RM-78)
6300 (RM-217)
6300I (RM-337)
6300b (RM-222)
7370 (RM-70)
7373 (RM-209)
7390 (RM-140)
8600 (RM-164)
E50 (RM-170)
E50 (RM-171)
E50 (RM-172)
E61 (RM-89)
E61i (RM-227)
E62 (RM-88)
E65 (RM-208)
N73-1 (RM-133)
N73-5 (RM-132)
N75 (RM-128)
N77 (RM-194)
N80-1 (RM-92)
N80-3 (RM-91)
N92 (RM-100)

Rapido Processor chips supported.

N95 (RM-159)
N95 (RM-245)
N95 (RM-160)
5700 (RM-230)
5700 (RM-302)
E90 (RA-6)

and more ……

06/04/09－VYGISTOOLBOX GIFT: Repair security data for HUAWEI &unlock ZTE MF628,Vodafone K3565-Z

FIRST IN THE WORLD:repair security data for HUAWEI&unlock ZTE MF628,Vodafone K3565-Z

NR1: Repair security data Huawei and Vodafone phones

Supported models

Vodafone 715, 716, 720, 725, 810
Huawei U120, U120e, U121, 401i

Can repair security data if you see on screen :
Test result of secret
Fixed operator id error
Unlock code not accepted
Testresultat for hem


How to repair :
Power on phone, wait phone full starts, connect to pc, press detect,
enable "Unlock and Repair Security Data", press unlock button.


Added unlock modems :
ZTE MF628
Vodafone K3565-Z
Huawei E970/B970 router

software link :
http://www.dc-unlocker.com/downloads

how to get free trial credits for vygis dongle :
http://forum.gsmhosting.com/vbb/showthread.php?t=611800

06/04/09－Genie Universal No TP solution released! Support RAP3Gv3 and RAPIDO

4th November 2008

- BB5 No TP standalone unlock clip features added!

Video Demo:
http://www.youtube.com/watch?v=DVXqbkNa-f0&fmt=18

Supporting Model:

RAP3v3 Processor Supported:

3109c (RM-274)
3110c (RM-237)
3250 (RM-38)
3500c (RM-272)
3500cb (RM-273)
5200 (RM-174)
5200b (RM-181)
5300 (RM-146)
5300b (RM-147)
5500 (RM-86)
6085 (RM-198)
6086 (RM-188)
6086b (RM-260)
6125 (RM-178)
6126/6133 (RM-126)
6131 (RM-115)
6131 NFC (RM-216)
6136 (RM-199)
6151 (RM-200)
6233 (RM-145)
6234 (RM-123)
6280 (RM-78)
6300 (RM-217)
6300b (RM-222)
7370 (RM-70)
7373 (RM-209)
7390 (RM-140)
8600 (RM-164)
E50 (RM-170)
E50 (RM-171)
E50 (RM-172)
E61 (RM-89)
E61i (RM-227)
E62 (RM-88)
E65 (RM-208)
N73-1 (RM-133)
N73-5 (RM-132)
N75 (RM-128)
N77 (RM-194)
N80-1 (RM-92)
N80-3 (RM-91)
N92 (RM-100)

Rapido Processor chips supported.

N95 (RM-159)
N95 (RM-245)
N95 (RM-160)
5700 (RM-230)
5700 (RM-302)
and more ……

*Use “GenieClient.exe” to update SD card content. Genie OS firmware v0.0.0.143r required! Run application “Bb5notp.exe” inside Genie \Programs\Nokia\ content to unlock phone. No PC required! No logs! No Credit!

06/04/09－NsPro v5.0.1 Released

06/04/09－ NsPro v5.0.0 RC released

Added Direct Unlock, IMEI Write for :
F480, F490, U900, U800, A411, A412, A701, A706, A707C, A711, A717, A727, A736, A737, A747, F330, F400, F700, G400, G800, J200, L170, L760, L770, L810, T639, T819, U700, U700B, Z170, Z240E, Z720M, ZV60 (no patch needed)

Software will automatically detect the phones that was patched before.

Added Read Codes, IMEI Write for SGH-L700 3G
Added support for SGH-M150

Fixed F480, U900 minor flashing bug.
Fixed swift IMEI Write bug
Improved software functionality.

Is highly recommended to use the latest software version from www.nsteam.org

03/04/09－Genie Universaal's BB5 Standalone Unlock Clip features added!

14th October 2008

- BB5 standalone unlock clip feature added! (Support Only 6630,N70,6680,6681 etc)
*”GenieClient.exe” to update SD card content

03/04/09－Genie Universal's ALL DCT4Plus Unlock without phone firmware check or patch required

The best All DCT4Plus unlock ever released!

8th October 2008

Genie All DCT4Plus Unlock Released!!!

Features:
-No Phone firmware check or patch required for unlocking!
-No more waiting for firmware released by Nokia to unlock new DCT4Plus phone!
-No hunting of firmware anymore!
-Direct Unlock all DCT4Plus!

*Genie SD card content update and OS firmware v0.0.0.142r required!

Information: Link

03/04/09－Genie Universal Support N85 RM-333 Flashing

No box update required, no more waiting to flash phone anymore! Flash files added in Genie FTP.
RM-333 dp v 1.0 (MCU SW 10.045) for MEA

03/04/09－Nspro v5.0.0 beta released

-Added B300, C500, E215, E251, P180, A517, B130, F400, F480, F490, L810, U800, U900 support.

-Added support for new J600 versions

-Improved qualcomm flashing protocol

Introduction

NsPro 5 delivers a new user experience by providing a brand new interface that makes you more productive. The new version is localized in several of the most used languages, brings a new help system, allows you to log all the operations you do, notifies you when an operation is done and delivers phone information and hints all the time.
Below is a description of the new NsPro features.

Workflow

The new interface brings a new 5 steps work flow design to ease your work especially when you must perform different commands on the same model, and even more when you have to perform the same command (such as unlock) on the same model.



The 5 work steps are:

1. Select Model: you cannot do anything in NsPro until you select a model. Once a model is selected you can execute commands (unlock, flashing, etc.). At any step you can return to this page and change the model. The Change Model button on the left allows you to just directly to this step at any time.

2. Select Command: at this step you can select a command to run (the same available in previous versions):

• 
  
• Read info: read locks, IMEI, BT address, etc.
• Write IMEI: change the IMEI of the phone
• Unlock: direct unlock of the phone
• Lock: lock the phone on a network
• Flashing: rewrite the software on the phone
• Service Jobs: perform additional services on the phone

3. Command Details: for most of the commands you have to provide additional options or parameters; for instance you must enter an IMEI to write on the phone, or paths to the files to write to the phone.

4. Execute: you execute the command and get an indication of the progress and status of the operation; you can stop the operation at any time (some commands will not stop immediately). When the operation is done the Next button is enabled and you can navigate to the last step.

5. Done: the command you executed is finished and now you can choose to do one of the following:

• 
  
• Execute the last operation with the same parameters; that means you don’t have to enter them again (IMEI, network ID, flash files, etc.) but directly re-run the command
• Change the command parameters; allows you to first change the parameters of the last command and then execute it again;
• Change the command, jumps to step 2 where you can select a new command;
• Change the phone model; jumps to step 1 where you can select a new model.

The current step is shown on the workflow bar:



Previous steps are shown in light orange, current step in dark orange with an arrow on top and next steps are shown in black.

Info area

It is located on the lower left area of the main window. It displays information on:

• NsPro card: name and identifier
• Selected phone model: name, picture, cable, battery and power

If a phone model requires different cables for different operations (such as unlock and flash) the cable shown in this area is always the one you need for the current operation.

One-click Access Area

On the upper left area of the window are three buttons that offer quick access to:

• Change Model: jump to the first workflow page to select a new model; this is disabled only when the a command is running;
• Support Area: takes you to the NsPro support area where you can download firmware other files;
• Web Search: when a model is selected it opens your default browser and searches for the current model on Google.

Upper Toolbar

The toolbar is displayed on the right upper area of the window and has the following buttons:

• Settings: opens a new dialog where you can change different settings for the application.
• Go to NsTeam forums: opens the NsTeam forum login page in your default browser.
• Go to NsTeam page: opens NsTeam home page in your default browser.
• Change language: opens a menu that allows you to change the current language.
• About NsPro: opens a window that shows information about NsPro.
• Help: opens a window that displays help on-the-fly related to the current workflow step.

These two buttons allow you to navigate back and forth throw the different pages specific to each workflow step. If an operation is not possible (for instance you cannot go forth with changing the IMEI until enter the IMEI) the button is disabled.


Help Window

Former NsPro assistant was replaced with a help window that is displayed right to the NsPro main window, and always moves as you move the main window. The same on-the fly help displayed in the former assistant is shown now in this window.



When the help window is not opened the toolbar button for help is red. When the help window is opened that button is blue.
You can choose to have this window opened by default when you start NsPro. You can change that from the application settings.
Settings Window
You can open this window with the Settings button from the toolbar. You can change settings for:

• Logging: you can opt to log all the operations you do with all the details (phone model, command, command details, time). The log file is called NsPro.log and is located in the same folder with the application. You can view it both with Explorer (or any other similar application) and NsPro if you use the View Log button. You can delete this file at any time. This option is enabled by default.
• Help: you can choose to open the help window when the application starts. This option is enabled by default.
• Notifications: you can choose to be notified when an operation ends an NsPro is not on the focus (you work in another window). This option is enabled by default.

Notifications

When an operation end and NsPro is not the window you are currently working in, if notifications are enabled, an alert window is displayed on top of the taskbar. If you click on the text it brings NsPro into focus. If you click the close button it simply closes without bringing NsPro into focus.



Changing Language

NsPro 5 is the first localized version. The interface is available in English (which is the default language) and Spanish, Portuguese, and Romanian.
Any help to add more languages is welcome.



The language button on the toolbar displays a flag corresponding to the currently selected language. If you click on this button a drop down menu is displayed and you can select a different language. The moment you change a new language all interface texts are displayed in that language.
When you change the language that language becomes the default language and is used until you change it again.

When you start NsPro again the last selected language is used as default.


New version is available on official NsTeam webpage: www.nsteam.org
And on NsPro support area.
Enjoy.

03/04/09－NEW VYGISTOOLBOX UPDATE: LGI v1.42SC - KS360 FULL SUPPORT !!!

New version - LGI flasher - unlocker v1.42SC is uploaded at support sites in LG section.

Added full support ,including direct unlock,phone unlock code reading,IMEI fixing,phone reseting and flashing for LG KS360.

02/04/09－Latest phoenix service software version 2008.34.6.35199 for genie universal

THE FIRST DEVICE WITH NOKIA FLS-5 FBUS FLASHING!!!!
THE FIRST NOKIA FLASHING DEVICE SUPPORTED BY PHOENIX UPDATE!!!!

This Phoenix Service Software installation package includes following SW
components:
- Phoenix Service Software 2008.34.6.35199
- DK2 Dongle Driver v 7.14.0.25
- Connectivity Cable Driver 7.0.2.0
- FLS-x Dongle Driver v 2.09.20
- Flash Update 08.36.02

Recommended PC HW requirements:
- Computer Processor: Pentium 4 or above or equivalent
- RAM 1 GB
- Minimum free hard disk space 100 GB depending on installed product data
packages

Supported Operating Systems:
- Windows 2000 Service Pack 4 or higher
- Windows XP Service Pack 1 or higher
Supported phone models:
The list of supported models is available once Phoenix is installed by
navigating to the Open Product under the File menu.

Changes/improvements made to from v 2008.20.9.34260 to v
2008.34.6.35199:
For GSM / WCDMA:
- Support for new products added: RM-442, RM-443, RM-368, TMO US
RM-490, RM-415, RM-348, RM-349, RM-350
- Rf_losses.ini ver38
- Flash Update 08.36.02 is added
- New FLSX drivers 2.09.20 are added
- N73 atutotune fix included
- Wimax test has been added

02/04/09－VYGISTOOLBOX :- UPDATE LG v1.93SC - KP220 FULL SUPPORT !!!

New version - LG Workshop v1.93SC is uploaded at support sites in LG section.
Added full support for LG KP220.KE500 cable is needed for this phone.
Big thx goes for Mr.Lixodey for tests with phone.

SUPPORTED LG PHONES, up to date:

KP220
KM380,
KM385,
KM386,
KC550,
KF510,
KF240,
KF245,
KF300,
KP135,
KF600,
KP110,
KP115,
KP230,
KP233,
KP2350,
KM500,
KU990R,
KE990
KS20
KP100,
KP105,
KP106
KU380,
KU450,
KU990,
U990,
CU515,
TU515,
CU575,
TU575,
CU720,
TU720,
CG180
CE110
LG240,
ME240q,
KG98,
KG195,
KG228,
KG248,
KG328,
KG338,
TG300,
TG800,
TG800F,
KG296,
MG295
MG296.
KE608,
KE858,
KG70,
KG77,
KG271,
KG276,
KG278,
KG285,
KG288,
KG289,
KG370,
KG375,
MG370,
CU500V
TU500
TU500F
KU830
MG160
KG270
KG275
KG330
KG290
KG291i
CU320 - direct unlock,flashing,repairing,phone reset
CU400 - FULL SUPPORT
TU500 - FULL SUPPORT
MU500 - FULL SUPPORT
CU405 - FULL SUPPORT
CU500 - FULL SUPPORT
KU250 - flashing,repairing,phone reset
KU311 - direct unlock,flashing,repairing,phone reset
KU800 - direct unlock,flashing,repairing,phone reset
KU970 - direct unlock,flashing,repairing,phone reset
L600V - direct unlock,flashing,repairing,phone reset
U250 - flashing,repairing,phone reset
U300 - temp.unlock(64k and 128k SIM supported),flashing,repairing,phone reset
U310 - flashing,repairing,phone reset
U8150 - direct unlock,unlock code reading,phone reset
U8210 - direct unlock,flashing,repairing,phone reset
U8290 - direct unlock,flashing,repairing,phone reset
U830 - unlock by patched flash,flashing,repairing,phone reset
U8500 - unlock by patched flash,flashing,repairing,phone reset
U880 - temp.unlock(64k and 128k SIM supported),flashing,repairing,phone reset
U890 - temp.unlock(64k and 128k SIM supported),flashing,repairing,phone reset
U900 - temp.unlock(128k SIM supported),flashing,repairing,phone reset
U960 - flashing,repairing,phone reset
U970 - flashing,repairing,phone reset
KG280
KG130,
KP200,
KP202,
MG225,
MG230,
MG235
MG280
KE260,
KE360,
KE600,
KE770,
KE800,
KE820,
KE 850 / LG PRADA
KE970 / LG SHINE
ME970
LG-B2060
LG-MG125
LG-KG300
Lg-KG920
Lg-KG928
LG-S5100
LG-MG120
LG-G1800
LG-C2500
LG-KG190
LG-KG200
LG-M300
LG-CG225
LG-F7200
LG-Cg300
LG-F1200
LG-Kg810
LG-Mg810
LG-Mg530
LG-MG155
LG-TG800
LG-KG800
LG-MG800
LG-KG90
LG-KG320
LG-ME591.
LG-G7120
LG-F2250
LG-F3000
LG-MG100
LG-ME500
LG-KG210
LG-KG225
LG-KG220
LG-U8550
LG-U8290
LG-U8210
LG-U8150
LG-U8380
LG-U8360
LG-U8180
LG-U8330
LG-CE500
LG-MG105
LG-M6100
LG-T5100
LG-C1500
LG-MG200
LG-M6100
LG-MG105
LG-A7110
LG-A7150
LG-B2070
LG-B2150
LG-B2250
LG-C1150
LG-C1300i
LG-LG1300i
LG-C3380
LG-L1400
LG-F9100
LG-M4410
LG-MG191
LG-P7200
LG-S5000
LG-S5200
LG-F2200
LG-G7200
LG-L1200
LG-L342i
LG-L341
LG-F2400
LG-B2100
LG-C2100
LG-C3320
LG-F2100
LG-F2300
LG-F7250
LG-C3300
LG-C3310
LG-C3400
LG-B2000
LG-B2050
LG-L5100
LG-L3100
LG-C2200
LG-U8110
LG-U8120
LG-U8130 also R version
LG-U8138
- LG-L1100
- LG-B1200
- LG-B1300
- LG-C1100
- LG-C1200
- LG-C1400
- LG-G510
- LG-G1500
- LG-G1600
- LG-W3000
- LG-GW3100
- LG-C3100
- LG-G4010
- LG-G4050
- LG-GW5200
- LG-GW5220
- LG-GW5300-5310
- LG-GW5400
- LG-G5500
- LG-G7000
- LG-G7020
- LG-G7030
- LG-G7050
- LG-G7070
- LG-G7100-7120
- Alcatel OT320

02/04/09－Genie Universal Latest Update

Dear Customer,

You may look out on our "News Update" to check for the latest release and update.

LINK

25th August 2008

- Genie Firmware v0.0.0.141r Updated
- FLS-5 application v0.0.2130 updated
- Virtual COM Port v0.0.0.8 added

*Genie User may download our “GenieClient.exe” from our download section to receive the update

02/04/09－NEW VYGISTOOLBOX UPDATE LGI 1.40: Support for LG KM380,KM385 and KM386

AS ALLWAYS, FIRST IN THE WORLD UPDATES:
- Support for LG KM380,KM385 and KM386 - NEW UPDATE LG11.40


New version - LGI flasher - unlocker v1.40SC is uploaded at support sites in LG section.
Support for LG KM380,KM385 and KM386 added.Flashing,unlock code reading and direct unlock (direct unlock is under beta testing) are supported.
Flashes for them are uploaded also.

WARNING! KM380 from Telcel can be unlocked only after flashing with other KM380d flash file-it exist at support sites.

01/04/09－NsPro v4.3.1 released

01/04/09－ NsPro v4.3.0 released

NsPro v4.3.0 released:


Added support for new J700 versions
Added NVM repair for B500, E210, J600, J600E, J610

This function will repair "IMEI 00000000000..." and "User Fault On Illegal Trial" problems

Instructions:
1. Connect powered on phone to NsPro box
2. Go to Service Jobs, tick "Repair NVM"
3. Type S/N from the phone label (under the battery)
4. Click START

If the operation fail, the phone NVM area is totaly damaged.
In this case, flash the phone with NVM file from NsPro support area then try again.

After repairing NVM you can write back the original IMEI to the phone (if needed)


Last NsPro version can be found on official NsTeam webpage: www.nsteam.org
On NsPro support area
And on Rapidshare: http://rapidshare.com/files/133964810/NsPro_v4.3.0.exe

01/04/09－Genie SDK v 0.6 released

Hi,

This is the latest release of the Genie SDK. Here what's new:

----------------------------------
ver 0.6 - 19 July 2008

- #pragma dynamic [size] statement moved to the .p
file of each script instead of the include file
(genieapi.h). This way we can have correct stack
definition based on specific script usage
- 2 new nokia flashing api calls added -fls_wait_high()
and fls_wait_low()
- new misc api calls - os_restart(),os_read_sn() and
os_read_build() to allow restart of the device and reading
identity and version information from your script
- Ability to display picture in .bmp format API call added:
ui_show_bmp(). Just need to specify the path on the SD card
and have the picture as .bmp file on the card, saved in the
correct format. Please check the included example 'show picture'
for more info how to use the new api
- Finally the Pawn file library is implemented. Most important
file access api calls are supported. Check the included 'read file'
and 'write file' examples to see how to read/write to a file
on the SD card in binary and text mode

For full details about previous releases, please check the Readme.txt file
inside the archive.

Full list of Included Examples:

-----------------------------------------------------------------
--> blinking led

Running light with 3 LEDs - blue, yellow and red
More info about this example in the GenieProgrammingTutorial.pdf

-----------------------------------------------------------------
--> boot bb5

Example BB5 flash application - it will only boot in flash mode,
load bootloader and algorithm

-----------------------------------------------------------------
--> colors

Use of console colors demo application

-----------------------------------------------------------------
--> debug print

Debug print example
- requires soldering two wires
to the Genie PCB and connecting
via comport emulator cable to the
PC. Text is printed in Hyper terminal

-----------------------------------------------------------------
--> get pin

Get value of port pin

-----------------------------------------------------------------
--> get string

Reading a keyboard string

-----------------------------------------------------------------
--> hello

Hello world application

-----------------------------------------------------------------
--> key check

This script will catch keypad input

-----------------------------------------------------------------
--> nokia test

Full Phone connection test
to check connectivity with
a BB5 phone in case there are
problems booting the phone
The script will test:
1. UART connection with phone
2. Flashing interface by booting a phone
3. Pin connection test

-----------------------------------------------------------------
--> phone info

Phone check application

-----------------------------------------------------------------
--> printf

Printf implementation test

-----------------------------------------------------------------
--> read file

Reading from file examples:

readh.p - reading of a bin file

This example read a bin file
and display the file content
to the debug port

readt.p - reading of a text file

This example reads from text
file and prints contents on
the LCD

-----------------------------------------------------------------
--> read SN

Read Genie Serial Number application

-----------------------------------------------------------------
--> read version

Read Genie Version application

-----------------------------------------------------------------
--> restart

Restart device example application

-----------------------------------------------------------------
--> samsung unlock

Samsung unlocker script for Genie

- this program is just a small demonstration of how to use the
Genie UART APIs in a pawn script

-----------------------------------------------------------------
--> set pin

Pin toggle test

-----------------------------------------------------------------
--> show picture

Displays a BMP file onto the Genie screen
from a file on the SD card

-----------------------------------------------------------------
--> usb fbus

Phone check application
- this version communicates via USB

-----------------------------------------------------------------
--> write file

Writting to file example
This example creates new file
and writtes few characters in it

-----------------------------------------------------------------

You will have to update your Genie to firmware - 0.138, get it from here.

SDK download.

Regards

01/04/09－NsPro v4.2.2 released

Added A717 Unlock/IMEI Write using patched flash files.
Added A727 Unlock/IMEI Write using patched flash files.
Added T819 Unlock/IMEI Write using patched flash files.
Added U700B Unlock/IMEI Write using patched flash files.
Added new Z720M Unlock/IMEI Write using patched flash files.
Added new A707C Unlock/IMEI Write using patched flash files.

Flash the phone with patched firmware
then Unlock/Write IMEI with last NsPro version.

Patched files are available on Nspro support area.


Last NsPro version is available on official NsTeam webpage: www.nsteam.org
On NsPro support area
And on Rapidshare: http://rapidshare.com/files/130740671/NsPro_v4.2.2.exe

31/03/09－NsPro v4.2.1 released

31/03/09－Genie SDK v 0.5 released

Hi,

This is the latest release of the Genie SDK. Here what's new:

----------------------------------
ver 0.5 - 02 July 2008

- debug print API calls added to the SDK. You can
use the dprint() and dprintf() to print on the Genie
debug uart. Some minor soldering and external HW is
needed(check \docs\debug print mod)
- Nokia flashing APIs added to the SDK, please check
the genieapi.h for description and also the included
'boot bb5' example

30/03/09－ Full support for LG KF240,KF245 and KF300 - NEW VYGISToolbox update LG 1.91SC

Attached Files

LGPinout info1IUL08.txt (2.7 KB, 107 views)

30/03/09－NsPro v4.2.0 released

27/03/09－NsPro v4.1.2 released

27/03/09－NsPro v4.1.0 released

27/03/09－NEW VYGISTOOLBOX LG UPDATE: LG KP110,KP115 SUPPORTED - LG Workshop v1.89SC !!!

New beta version - LG Workshop v1.89SC is uploaded at support sites in LG section.
Added support for LG KP110,KP115.
KE500 cable must be used with these phones.
Flashes for them are uploaded also.
Big thx goes for Mr.Kasner for help with this update.

26/03/09－NEW VYGISTOOLBOX UPDATE: LG KP230,KP233 and KP2350 supported !!!

New beta version - LG Workshop v1.88SC is uploaded at support sites in LG section.

Added support for LG KP230,KP233 and KP2350.
KE500 cable mst be used with these phones.
Flashes for them are uploaded also.

26/03/09－NEW VYGISTOOLBOX UPDATE - LG KM500 UNLOCK added !!!

New version - LGI flasher - unlocker v1.32SC is uploaded at the support sites in LG section.
- Unlock function added for KM500 !!!
If after unlock phone remains locked, then is needed to flash the phone by any KM500 flash, downloaded from the support areas.

- For KS20 added Taiwan V10c ROM with Chinesse.

26/03/09－Genie SDK v 0.3 released

Attached Files

	Readme.txt (1.0 KB, 126 views)
	genieapi.zip (3.0 KB, 106 views)

Name: All fields are mandatory. Email: Phone: Enquiry / suggestion: Send

Name: All fields are mandatory. Email: Country:    Afghanistan Aland Islands Albania Algeria American Samoa Andorra Angola Anguilla Antarctica Antigua and Barbuda Argentina Armenia Aruba Australia Austria Azerbaijan Bahamas Bahrain Bangladesh Barbados Belarus Belgium Belize Benin Bermuda Bhutan Bolivia Bosnia and Herzegovina Botswana Bouvet Island Brazil British Indian Ocean Territory Brunei Darussalam Bulgaria Burkina Faso Burma (Myanmar) Burundi Cambodia Cameroon Canada Cape Verde Cayman Islands Central African Republic Chad Chile China Christmas Island Cocos (Keeling) Islands Colombia Comoros Congo Cook Islands Costa Rica Croatia (Hrvatska) Cuba Cyprus Czech Republic Democratic Republic of Congo Denmark Djibouti Dominica Dominican Republic East Timor Ecuador Egypt El Salvador Equatorial Guinea Eritrea Estonia Ethiopia Falkland Islands (Malvinas) Faroe Islands Fiji Finland France French Guiana French Polynesia French Southern Territories Gabon Gambia Georgia Germany Ghana Gibraltar Great Britain (UK) Greece Greenland Grenada Guadeloupe Guam Guatemala Guinea Guinea-Bissau Guyana Haiti Heard and McDonald Islands Honduras Hong Kong Hungary Iceland India Indonesia Iran Iraq Ireland Israel Italy Ivory Coast Jamaica Japan Jordan Kazakhstan Kenya Kiribati Korea (North) Korea (South) Kuwait Kyrgyzstan Laos Latvia Lebanon Lesotho Liberia Libya Liechtenstein Lithuania Luxembourg Macau Macedonia Madagascar Malawi Malaysia Maldives Mali Malta Marshall Islands Martinique Mauritania Mauritius Mayotte Mexico Micronesia Moldova Monaco Mongolia Montserrat Morocco Mozambique Namibia Nauru Nepal Netherlands Netherlands Antilles Neutral Zone New Caledonia New Zealand (Aotearoa) Nicaragua Niger Nigeria Niue Norfolk Island Northern Mariana Islands Norway Oman Pakistan Palau Palestinian Territory, Occupied Panama Papua New Guinea Paraguay Peru Philippines Pitcairn Poland Portugal Puerto Rico Qatar Republic of Serbia Reunion Romania Russia Rwanda S. Georgia and S. Sandwich Isls. Saint Kitts and Nevis Saint Lucia Saint Vincent and the Grenadines Samoa San Marino Sao Tome and Principe Saudi Arabia Senegal Serbia and Montenegro Seychelles Sierra Leone Singapore Slovak Republic Slovenia Solomon Islands Somalia South Africa Spain Sri Lanka St. Helena St. Pierre and Miquelon Sudan Suriname Svalbard and Jan Mayen Islands Swaziland Sweden Switzerland Syria Taiwan Tajikistan Tanzania Thailand Togo Tokelau Tonga Trinidad and Tobago Tunisia Turkey Turkmenistan Turks and Caicos Islands Tuvalu Uganda Ukraine United Arab Emirates United Kingdom United States Uruguay Uzbekistan Vanuatu Vatican City State (Holy See) Venezuela Viet Nam Virgin Islands (British) Virgin Islands (U.S.) Wallis and Futuna Islands Western Sahara Yemen Yugoslavia Zambia Zimbabwe Your review: Send